Logitech Mouse Durability Complaints Signal Opportunity for Robust Premium Alternatives
The Reddit discussion around the leaked Logitech MX Master 4, while buzzing with excitement about a new product, mostly highlights ongoing user frustration with the durability of previous MX Master and other high-end Logitech mice. Key recurring complaints include:
- Degrading Rubber/Outer Coatings: Many users report that the rubberized "soft touch" material becomes sticky, "melts," or peels over time, even with clean hands and normal use. This issue is common in the MX Master series and G502 mice.
- Premature Switch Failures: Several users have experienced issues with mouse button switches, especially the left-click, failing prematurely, sometimes within 1-1.5 years of light to moderate use. One comment suggests this might be due to under-volting the switches to save battery life.
- Perception of Planned Obsolescence: These durability issues have led some users to believe that these problems are intentional, a form of planned obsolescence.
Analysis & Opportunities:
This sentiment, consistent with previous analyses, signals a significant and ongoing unmet consumer need for greater longevity and material robustness in premium peripherals.
-
For Logitech:
- Material Innovation & Marketing: The launch of the MX Master 4 presents a critical opportunity. If Logitech has addressed these material and switch issues (e.g., using more durable plastics like PBT instead of easily degrading rubberized coatings, or employing higher-rated, more robust switches), they must make this a central part of their marketing campaign. Phrases like "Engineered for Lasting Comfort," "New Advanced Durability Coating," or "Upgraded Long-Life Switches" could directly address user pain points and rebuild trust.
- Transparency: Acknowledging past issues (even subtly) and explaining the improvements in the new model could be a powerful trust-building measure.
- Modular Design/Repairability: While less likely for the MX Master line, exploring easier switch replacement or offering replacement outer shells could be a long-term strategy to address durability concerns and cater to a sustainability-conscious market.
-
For Competing Manufacturers:
- Highlight Durability as a Differentiator: Competitors can continue to capitalize on Logitech's perceived weakness by aggressively marketing the superior build quality, material science (e.g., PBT keycaps/shells, premium switch brands and ratings), and longevity of their own premium mice.
- Target Disaffected Logitech Users: Marketing campaigns can be tailored to users frustrated with the lifespan of their current premium mice, emphasizing reliability and robust construction as core selling points.
- Develop "Built-to-Last" Product Lines: There's a market segment willing to pay a premium for peripherals explicitly designed and marketed for extreme durability and repairability, potentially even with extended warranties focused on material integrity and switch lifespan.
The consistent outcry for better durability indicates that this is not a niche concern but a widespread expectation for products in the premium price bracket. Addressing this is crucial for brand loyalty and market leadership.
Origin Reddit Post
r/gadgets
Logitech MX Master 4: First picture of new mouse leaked ahead of imminent launch
Posted by u/dapperlemon•06/02/2025
Top Comments
u/internetlad
Yep that's a mouse
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/[deleted]
[deleted]
u/the908bus
Do I have to pay a monthly sub for it?
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/internetlad
Yep that's a mouse
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/nevergirls
u/nevergirls
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/TangerineX
Man I just want them to bring back the MX518.
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/TangerineX
Man I just want them to bring back the MX518.
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/internetlad
Yep that's a mouse
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/TangerineX
Man I just want them to bring back the MX518.
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/TangerineX
Man I just want them to bring back the MX518.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/the908bus
Do I have to pay a monthly sub for it?
u/nevergirls
u/root_b33r
Cool mines broke, guess I’ll get this when it comes out, hopefully the keyboard gets an update too
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/internetlad
Yep that's a mouse
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/nevergirls
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/the908bus
Do I have to pay a monthly sub for it?
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/nevergirls
u/the908bus
Do I have to pay a monthly sub for it?
u/TangerineX
Man I just want them to bring back the MX518.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/nevergirls
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/internetlad
Yep that's a mouse
u/Digital_loop
I still have a working mx master, thing just won't quit!
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/root_b33r
Cool mines broke, guess I’ll get this when it comes out, hopefully the keyboard gets an update too
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/TangerineX
Man I just want them to bring back the MX518.
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/the908bus
Do I have to pay a monthly sub for it?
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/the908bus
Do I have to pay a monthly sub for it?
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/internetlad
Yep that's a mouse
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/TangerineX
Man I just want them to bring back the MX518.
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/the908bus
Do I have to pay a monthly sub for it?
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/nevergirls
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/TangerineX
Man I just want them to bring back the MX518.
u/internetlad
Yep that's a mouse
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/TangerineX
Man I just want them to bring back the MX518.
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/the908bus
Do I have to pay a monthly sub for it?
u/nagi603
Probably more of a "optimize out the one thing we do not advertise or even list in our specs sheet: operating a component well outside its rated specifications, shortening lifetime." But hey,
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/[deleted]
[deleted]
u/nevergirls
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/the908bus
Do I have to pay a monthly sub for it?
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/TangerineX
Man I just want them to bring back the MX518.
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/internetlad
Yep that's a mouse
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/internetlad
Yep that's a mouse
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/TangerineX
Man I just want them to bring back the MX518.
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/the908bus
Do I have to pay a monthly sub for it?
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/KrookedDoesStuff
I just want Logitech to either make the G600 again, or a good successor for it
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/internetlad
Yep that's a mouse
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/internetlad
Yep that's a mouse
u/nevergirls
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/iDestroyedYoMama
Mine stopped left-clicking after 1 year of full time work use.
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/the908bus
Do I have to pay a monthly sub for it?
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/__-_-_--_--_-_---___
This gif works for literally every situation
u/TangerineX
Man I just want them to bring back the MX518.
u/nevergirls
u/ArchusKanzaki
I change from Master 3 and Master 3S, and it seems to be abit more durable. However, rubber coating will peel at some point, even if you don't have sandpaper on hand. Hope they changed it to
u/RickGrindskin
MAKE ANOTHER G600 LOGITECH IM BEGGING
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/daddylo21
Add in how your family has been using Logitech MX mice since their inception and it's now become a family tradition to pass the used ones down to the younger kin on the anniversary of buying
u/internetlad
Yep that's a mouse
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/nicman24
does it have the gaming sensor? it is the only thing it was missing for me
u/TangerineX
Man I just want them to bring back the MX518.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/signfang
Hope they've improved the durability of its weak-ass switches. Mine died like 1.5 years of light use.
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/legohax
Use ChatGPT to stretch that into 2,000 words and call it a week
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/CosmicCreeperz
They use that stupid rubberized soft touch plastic that starts seeping/separating after a while. Mine was gross eventually as well. It’s like planned obsolescence, so annoying when companie
u/Fidelius90
Impressive. My mx3 looks like it has leprosy.
u/internetlad
Yep that's a mouse
u/kushangaza
Ah, a reddit thread about an article about a reddit thread.
Anyways, I have a MX Master 2 and 3. They are great mice. This picture looks roughly the same, not much to say about it
u/Starfox-sf
Mine is MX Anywhere 2. Capable of BT and Unifying, had it for nearly a decade or so.
u/Webfarer
Based. I think you shouldn’t become a tech journalist.
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/nevergirls
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl
u/the908bus
Do I have to pay a monthly sub for it?
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/nagi603
There is an [interesting video](https://www.youtube.com/watch?v=v5BhECVlKJA) out there that correctly points out the reason: they under-volt the switches in the name of battery life.
So unle
u/Insidious_Ursine
Same thing happens to the G502. Outer part starts breaking down and it starts feeling nasty.
u/gredr
Also some basic information about what a mouse is and why someone would use one. Don't name the mouse in the headline, and don't name it in the first 200 words of the article.
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/Blankcarbon
It does feel really nice though- wish there was a way to have a more permanent usage of it.
u/the908bus
Do I have to pay a monthly sub for it?
u/ArchusKanzaki
Hoping that they changed the rubber coating to something more durable.
Also, hoping that there will be a button to easily change device that is NOT on the bottom of the mouse.
And lastly, b
u/signfang
So.... it's one of those planned obsolescences?
u/interloper09
I really really hope they fixed whatever material issues they had with all the past ones where after a while the outer coating just decides to melt. And no I don’t have dirty or grimy hands,
u/_LV426
Every high-end mouse I’ve owned has done this and I keep my hands clean/don’t use moisturisers and stuff at my desk. Something in the matt finish rubber they use doesn’t agree with my skin cl